IT 3345: Software Architecture Full Course Tasks
IT 3345: Software Architecture Full Course Tasks
IT 3345: Software Architecture Full Course Tasks
IT 3345: Software Architecture Full Course Tasks
Question
Having Trouble Meeting Your Deadline?
Get your assignment on IT 3345: Software Architecture Full Course Tasks completed on time. avoid delay and – ORDER NOW
IT3345 Software Architecture
Unit 1 Discussion
Struggling to Meet Your Deadline?
Get your assignment on IT 3345: Software Architecture Full Course Tasks done on time by medical experts. Don’t wait – ORDER NOW!
Comparing
Agile Methodologies
Review the
CapraTek Overview found in the discussion Resources as required.
There are
several different Agile methodologies that CapraTek might use for its new
software development process. Briefly compare two Agile methodologies and
provide arguments for the selection of one of them based upon your
understanding of CapraTek’s requirements and needs.
Why might
your choice be superior to a waterfall approach?
Response
Guidelines
Comment on
the post of at least two other learners. Offer insights, solutions, examples,
or opinions that add depth and value to the conversation.
Note
regarding discussions in this course: The content topic should determine the
length of your post; however, a minimum of 150 words is recommended. Refer to
the discussion participation scoring guide for posting expectations.
Make your
initial posts by midweek to allow sufficient time for peers to respond. The
expectation within the course discussions is to respond to at least two posts
by the end of the unit, but it is highly recommended that you extend the
dialogue further. Responding over multiple days will help stimulate a lively
discussion
Learning
Components
This activity
will help you achieve the following learning components:
Compare
Agile methodologies with traditional methodologies of software architecture.
Explain the
needs and requirements of CapraTek’s software development process.
Read Also: IT3345 Unit 1 Assignment Agile Methodology
IT3345 Software Architecture
Unit 2 Discussion
Agile and
Staffing
Staffing
can be a challenge when there are multiple development projects going on at the
same time. Resource management is often one of the crucial factors in determining
the success of a project.
Research
and find two sample resource and scheduling samples for Agile development
projects to share with the class. Explain how they relate to CapraTek based on
the existing staffing. Based on your Agile methodology chosen, what would a
typical breakdown of staffing look like?
Response
Guidelines
Comment on
the post of at least two other learners. Offer insights, solutions, examples,
or opinions that add depth and value to the conversation.
Note
regarding discussions in this course: The content topic should determine the length
of your post; however, a minimum of 150 words is recommended. Refer to the
discussion participation scoring guide for posting expectations.
Make your
initial posts by midweek to allow sufficient time for peers to respond. The
expectation within the course discussions is to respond to at least two posts
by the end of the unit, but it is highly recommended that you extend the
dialogue further. Responding over multiple days will help stimulate a lively
discussion.
Learning
Components
This
activity will help you achieve the following learning components:
Describe
how an Agile methodology specifies personnel deployment.
Describe
how an Agile methodology specifies organization and scheduling operations.
IT3345 Software Architecture
Unit 3 Discussion
Technology
Stack
Although
many organizations prefer to use a single technology stack, it is not always
viable because of various application needs. However, it is important to
understand all the pieces of technology involved with certain technology
stacks. The two most common are Microsoft .NET and Java-based technologies. In
the selection of either, there are specific operating systems, databases,
programming languages, development tools and servers that are used with each technology
stack.
Research
all the necessary technical standards for a technology stack and make
recommendations of what must be included for an organization to use that
technology stack for software development.
Response
Guidelines
Comment on
the post of at least two other learners. Offer insights, solutions, examples,
or opinions that add depth and value to the conversation.
Note
regarding discussions in this course: The content topic should determine the
length of your post; however, a minimum of 150 words is recommended. Refer to
the discussion participation scoring guide for posting expectations.
Make your
initial posts by midweek to allow sufficient time for peers to respond. The
expectation within the course discussions is to respond to at least two posts
by the end of the unit, but it is highly recommended that you extend the
dialogue further. Responding over multiple days will help stimulate a lively
discussion.
Learning
Components
This
activity will help you achieve the following learning components:
Explain the
hardware requirements for a business using an Agile methodology.
IT3345 Software Architecture
Unit 4 Discussion
Software
Development Phases
The Guide
to the Software Engineering Body of Knowledge (SWEBOK) describes accepted
knowledge about software engineering and is an internationally accepted. The
first four phases defined in the SWEBOK guide are the most commonly used phases
across most software development projects. However, there can be differences
based on the specific methodologies being used.
Based on
the Agile methodology that you have selected, research and share resources that
help define one of the software phases. How do those resources help define that
phase for CapraTek?
Response
Guidelines
Comment on
the post of at least two other learners. Offer insights, solutions, examples,
or opinions that add depth and value to the conversation.
Note
regarding discussions in this course: The content topic should determine the
length of your post; however, a minimum of 150 words is recommended. Refer to
the discussion participation scoring guide for posting expectations.
Make your
initial posts by midweek to allow sufficient time for peers to respond. The
expectation within the course discussions is to respond to at least two posts
by the end of the unit, but it is highly recommended that you extend the
dialogue further. Responding over multiple days will help stimulate a lively
discussion.
Learning
Components
This
activity will help you achieve the following learning components:
Identify
steps in each software development phase.
IT3345 Software Architecture
Unit 5 Discussion
Application
Maintenance
Discuss the
following in your post:
Why
software applications such as the ones developed by CapraTek need to be
maintained.
Which part
of the software maintenance process you believe is the most complex, and which
is the most important. Explain your reasoning.
Response
Guidelines
Comment on
the post of at least two other learners. Offer insights, solutions, examples,
or opinions that add depth and value to the conversation.
Note
regarding discussions in this course: The content topic should determine the
length of your post; however, a minimum of 150 words is recommended. Refer to
the discussion participation scoring guide for posting expectations.
Make your
initial posts by midweek to allow sufficient time for peers to respond. The
expectation within the course discussions is to respond to at least two posts
by the end of the unit, but it is highly recommended that you extend the
dialogue further. Responding over multiple days will help stimulate a lively
discussion.
IT3345 Software Architecture
Unit 1 Assignment
Agile
Methodology
Overview
In this
assignment you focus on the process methodology of Section 5, Standards and
Procedures of your software development plan (SDP)—choosing, diagramming,
explaining and finally applying your choice of Agile development methodology to
CapraTek. The choices that you make here drive the rest of the SDP, so it is an
appropriate starting point.
Preparation
Use the
assignment Resources to complete the following:
View the
CapraTek scenario in the CapraTek Overview document.
Download
the Software Development Plan Template. Save it as “CapraTek_SDP_u1”
and use it to complete and submit your assignments for this course.
Directions
Consider
the CapraTek scenario and address the items below in Section 5 of the CapraTek
SDP document.
Select an
Agile methodology and briefly justify why your chosen Agile methodology is
appropriate for CapraTek.
Create a
Unified Modeling Language (UML) activity diagram that illustrates the process
methodology life cycle.
Describe
each of the phases depicted in the process methodology diagram with relation to
the software development process. Keep your descriptions generic—the point is
to explain the processes involved in each phase to illustrate the concept.
Partial
Example: Scrum initial requirements steps: “During the initial
requirements steps, the product owner examines the product backlog and gets
feedback from the customer and other stakeholders. The product owner then
informs the development team of the items from the product backlog . . .”
Select two
of the phases and describe how each would manifest itself in the context of
CapraTek. Consider CapraTek’s requirements, resources, time constraints, et
cetera.
IT3345 Software Architecture
Unit 2 Assignment
Resources,
Scheduling, Organization, and Staffing
Overview
A proper
SDP document must consider the organization’s capabilities and constraints. This
assignment focuses on the first three sections of the SDP:
Section 1:
Introduction: Scope, Purpose, and Business Challenges.
Section 2:
Resources and Scheduling.
Section 3:
Organization and Staffing.
Considering
the following questions may help guide you in this assignment:
Why is
there a need for the software development plan?
What are
CapraTek’s motivations to create the new architecture?
What are
the consequences of not adopting a new architecture?
What
business problem will the new architecture solve?
What
resources and scheduling would be required for each development project?
What roles
need to be filled within the Agile methodology that you have selected?
Preparation
Review the
CapraTek scenario found in the assignment Resources as required.
Save a new
version of your SDP document using this unit number and use it to complete the
assignment.
Directions
Consider
the CapraTek scenario and address the items below in sections 1–3 of the
CapraTek SDP document:
Introduction
(SDP Section 1): Complete the following sections:
Scope.
Purpose.
Business
challenges: Identify and prioritize the challenges facing CapraTek.
Resources
and Staffing (SDP Section 2): Specify the project roles and responsibilities
based on your Agile process methodology. Assume three concurrent and similarly
scoped projects.
Organization
and Scheduling (SDP Section 3): Specify the project allocation breakdown based
on the required resources for anticipated projects. As CapraTek does plan to
run three software development projects simultaneously, resources may need to
be shared between projects. Note: You will need to make, and state, general
assumptions regarding and based on the approximate size of each project.
IT3345 Software Architecture
Unit 3 Assignment
Technical
Standards
Overview
Technical
standards are important to ensure that all development staff utilize the same
technologies for consistency, maintenance, and support. By ensuring that all
individuals follow a specific set of standards, development processes can be
efficiently completed by many different individuals rather than having the
dependency on a few.
In this
assignment you complete SDP Section 6, Technical Standards, which is intended
to provide developers a high-level view of technologies to be used.
Preparation
Review the
CapraTek Overview found in the assignment Resources as required.
Save a new
version of your SDP document using this unit number and use it to complete the
assignment.
Directions
Consider
the CapraTek scenario and address the items below in Section 6 of the CapraTek
SDP document:
Create a
technology stack component diagram showing where each technical operation is
performed.
Describe
the following components and justify why each is important for solving the
identified technical challenges:
Servers:
Describe the various types of servers that are appropriate for integration with
the identified applications.
Development
Software: Identify four development and support tools needed for software
development that both address identified technical challenges and that
interoperate with Java and .NET operations. Justify your choices.
IT3345 Software Architecture
Unit 4 Assignment
Software
Phases
Overview
By adhering
to the key software development phases defined in the SWEBOK, CapraTek has
signaled its commitment to creating consistent software projects.
In this
assignment you complete SDP Section 7, Software Phases.
Preparation
Review the
CapraTek Overview found in the assignment Resources as needed.
Save a new
version of your SDP document using this unit number and use it to complete the
assignment.
Optional
Resource
You may
refer to the SWEBOK V3 available in the assignment Resources.
Directions
Consider
the CapraTek scenario and address the items below in Section 7 of the CapraTek
SDP document:
Create
activity diagrams depicting the steps involved in each of the following
software development phases:
Phase 1:
Software Requirements.
Phase 2:
Software Design.
Phase 3:
Software Construction.
Phase 4:
Software Testing.
Describe
the high level steps involved with each phase. Note: Phase 3 has already
completed this portion as an example.
Explain how
your chosen Agile methodology affects the process flow of each software
development phase.
IT3345 Software Architecture
Unit 5 Assignment
Verification,
Validation, and Maintenance
Overview
Once a
software development project is completed at CapraTek, it is also important
that there is a plan in place to have the system verified and validated to
assure it is the right system and is developed correctly. The SDP needs to
spell out how independent verification and validation is to be conducted.
Software is
rarely completely done at the end of a project. There may be bugs that are
uncovered or additional criteria that must be implemented. Planning out a
process for the maintenance of the software is crucial. A large part of the
software maintenance is to preserve its integrity as changes are made. Any
changes should be logged and tracked. There needs to also be criteria put in
place when certain software needs to be retired or migrated.
In this
assignment you will complete SDP Section 8, Validation and Verification, and Section
9, Maintenance Process.
Preparation
Review the
CapraTek Overview found in the assignment Resources.
Save a new
version of your SDP document using this unit number and use it to complete the
assignment.
Directions
Consider
the CapraTek scenario and address the items below in Section 8 and Section 9 of
the CapraTek SDP document:
Create a
plan for the independent verification and validation of software based upon
your chosen Agile methodology per SWEBOK standards (SDP Section 8). It should
be one page or less.
Create an
activity diagram demonstrating the software maintenance process (SDP Section 9).
Create a
maintenance plan that specifies how to maintain deployed software per SWEBOK
standards (SDP Section 9). It should be one page or less.
Don’t wait until the last minute
Fill in your requirements and let our experts deliver your work asap.